Type W RoHS Mash UL Certificate 2kv Cu/Epr/CPE Portable Power Mining Cable

2000 Volts. 90°C(-40°C). Sunlight and Oil Resistant.

UL and c(UL) Listed, MSHA Approved,

UL1650  TYPE W 90°C, 2000 V (UL/CSA) MSHA APPROVED  TYPE W PORTABLE POWER CORD  UL/CUL  NO. E482608

APPLICATIONS

Type W Portable Power Cable is suitable for use in Industrial and light-to-medium mining applications, heavy-duty service and temporary as power supply cables. Motor, battery and generator leads. It is also used for mobile and portable electrical equipment.

SPECIFICATIONS

• UL Listed – Type W per UL 1650

• Conductors are manufactured in accordance with ASTM and B-172

• Made in accordance with ICEA S-75-381

• NEMA WC-58 – Portable and Power Feeder Cables for Use in Mines and Similar Locations

• CSA or c(UL) Certified as applicable

• Meets FT-5 Flame Test

CONSTRUCTION

• CONDUCTORS:

Tin coated or bare, soft drawn, annealed, flexible, stranded copper per ASTM B-172.

• INSULATION:

 Ethylene Polypropylene Rubber (EPR) insulation colored (5C:black, white ,green ,red, orange;

4C: black, white , green , red)

• CABLING:

Five conductor Type W, are assembled in a round configuration with a woven nylon polyester binder served over the entire cable assembly for added core stability.

• JACKET:

 Heavy-duty, flame resistant thermosetting Chlorinated Polyethylene (CPE).

 Jacket colored(black)

Marking

Steel wheel embossing with max.550mm between two elements, as follows:

HT CABLES n/C xx AWG E482608(UL) TYPE W 2000V 90ºC wet&dry Sun Res Oil Resistant 75C -40ºC FT1 FT5 or C(UL) TYPE W 2000V Sun Res -40ºC FT1 FT5

Eg.:

COLOR CODE CHART

COND

Type W 4 & 5 Conductors 90°C 600/2000V

APPLICATION:

Type W is for use in heavy duty power systems as power supply cable such as: AC systems (grounded and ungrounded); mobile and portable electrical equipment; motor and battery leads. 4 conductor constructions are for three phase systems with one conductor being used as a ground. 5 conductor constructions are for three phase systems where one conductor is used as a neutral and one conductor being used as a ground, Type W is for applications up to 2000 volts and temperatures from -40°C to +90°C. 

CONDUCTORS: • Flexible strand soft drawn tin coated copper conductor • Green conductor for grounding conductor purpose only

SEPARATOR: • Tape separator between conductor and insulation

INSULATION: • Ethylene-Propylene Rubber (EPR)

REINFORCEMENT: • Single faced rubber filled binder tape applied over core

JACKET: • Black heavy duty CPE thermoset compound. Ozone, sunlight, oil, flame, weather, impact, and abrasion resistant

COLOR CODE:  Circuit Identification Color :    

STANDARDS:

• UL 44 Thermoset-Insulated Wire and Cable

• UL 1650 Portable Power Cable

• CSA C22.2 96-17 • C(UL) FT1 & FT5

• Oil Resistant Oil Resistant Inners, Sunlight resistant 90°C Wet or Dry

• ASTM B-33 Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

• Rated and flexible at -40°C to +90°C

• ASTM B-172 Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members

• ICEA S-75-381/NEMA WC 58 Portable and Power Feeder Cables for Use in Mines and Similar Applications

• ICEA S-95-658/NEMA WC 70 Nonshielded Power Cables Rated 2000 Volts or Less