TUV UL Solar Cable Wire PV Photovoltaic En50618 4mm2 6mm2 95mm2 120mm2 240mm2

We both provide  EN50618  and UL4703 solar PV cable with certification

Type TUV  solar cable

Standard
 Conductor:    1.5mm2-240mm2 tinned copper
   Insulation:    XLPE, low smoke, halogen-free,flame retardant, 
                        oil,abrasionchemical cross-linked compound                                                                          
      Sheath:    XLPE, low smoke, halogen-free,flame retardant, 
                       oil,abrasion,chemical cross-linked compound
     Voltage:    AC 1000/1000V & DC 1500V
   Standard:      EN50618

Application:

 For the cabling between the solar modules and as extension cable between the module strings and the DC/AC inverter Gable and flat roof photovoltaic systems Photovoltaic plants and solar parks Flexible or building-integrated PV systems including connecting photovoltaic power supply systems & can be used indoor & outdoor for flexible and fixed installations with high mechanical strength in extreme weather conditions. from – 40 deg.C to 120 deg.C maximum and Ozone & UV Resistant and full protection against Ultra Violet rays.

Product Features

Weather/UV-resistant acc. to HD 605/A1

Ozone-resistant according to EN 50396

Halogen-free and flame-retardant

Good notch and abrasion resistance

XLS-R = X-Linked Standard – Reduced Proven electron beam cross-linked quality

Cold Flexibility

Long Life about > 25 years

Suitable to the common connector type

Electrical Properties

Nominal voltage U0/U acc. VDE AC 600/1000 V – 720/1200 V & DC 900/1800 V

Max. permitted DC voltage 1.8 kV (Conductor/Conductor. non-earthed system

Working voltage: According to. TÜV 2 PfG 1169 DC 1000 V

Test voltage AC 6,5 kV for 5 min & DC 15 KV.

Voltage resistance tests according to EN 50395

Insulation Resistance – 1000 m-OHM / km minimum

Mechanical Properties

Minimum Bending Radius: 4 to 5 x Outer Diameter

Dynamic Penetration: According to the requirement of Cables for PV systems 2 Pfg 1169/08.2007 Annex F

Notch Propagation: According to 2 Pfg 1169/08.2007 Annex G

Tensile Strength: 15 N/mm2 for insulation and 12.5 N/mm2 for

 sheathing – according to EN60811

Elongation of Insulation and sheathing: 125% – according to EN60811

Shore Hardness 85 According to DIN EN 53505

Shrinkage: 2% at 120°C according to EN 60811-1-3

EU Directives

The cables are RoHS (Restriction of certain Hazardous Substances) compliant as per EU Directives 2002/95/EC

Thermal Properties

Ambient temperature: -40 °C to 90°C (25-year life)

Conductor temperature: 120 °C max.

Short Circuit temperature: 200 °C for 5 sec.

Thermal Endurance Test: According to EN 60216-2

High-Temperature Pressure: Test according to EN 60811-3-1

Damp – Heat Test: According to EN 60068-2-78

1000 hrs. at 90°C with 85% humidity

Chemical Characteristics

Mineral Oil Resistance: according to EN 60811-2-1 & VDE 0473-811-2-1

Ozone Resistance: according to EN 50396 part 8.1.3 Method B

Weathering-UV Resistance: according to HD 605/A1 or DIN 53367

Ammonia resistant: 30 days in a saturated ammonia atmosphere (internal testing)

Very good resistance to oil and chemicals

High wear and robust, abrasion-resistant

Acid & Alkaline Resistance: According to EN 60811-2-1 (Oxal acid and sodium hydroxide)

Type UL solar cable

Standards:
UL-4703, UL-854, UL-44
UL 1685-FT4/IEEE 1202 (70,000 Btu/hr) Flame Test (1/0 AWG and larger)
ICEA T-29-520 (210,000 Btu/hr) Flame Test
NEMA WC70/ICEA S-95-658
NFPA 70: National Electrical Code (NEC)

Conductors: aluminum compact stranded 
or Stranded conductors, uncoated copper per ASTM-B787 and ASTM-B8

Insulation:
Cross-linked polyethylene (XLPE) insulation per UL-854, UL-4703 and UL-44

voltage: 600v,1000v,2000v

Features:
Sunlight, ozone, and UV resistant
Moisture resistant
RoHS compliant
REACH compliant
-40°C to +150°C temperature range

Applications:
Type Photovoltaic copper conductors are suitable for outdoor rooftop applications without conduit and for use in conduits and raceways installed underground in conduit in wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90ºC. Applications requiring direct burial is permitted for Type Photovoltaic per UL-854. Applications requiring type Photovoltaic conductor, temperatures shall not exceed 90ºC in wet or dry locations.
 
Features:
Available in 600V and 1000V/2000V. All cables comply with UL’s VW-1 (Vertical Wire) Flame Test. Insulation compounds are rated for flame and sunlight-resistance in all sizes and colors. Photovoltaic conductors of 1/0 through 1000 KCMIL are rated for CT use. Sequential foot markings located every foot on master reels only for 1 AWG through 1000 KCMIL unless otherwise specified. RoHS compliant. Flexibility at Low-Temperature Test. Carries -40 °C  rating.