APPLICATIONS
     NMD90 cables may be used for both exposed work in dry locations or concealed work in dry or damp locations.
    
     The maximum allowable conductor temperature is 90°C. The minimum recommended installation temperature is -25°C
    
     for two-conductor cables and -10°C for three-conductor cables (with suitable handling procedures). Material should be
    
     properly stored above 0°C for 24 hours prior to installation.
    
     The maximum voltage rating for all intended applications is 300 volts. Consult the Canadian Electrical Code1 for further
    
     information related to applications.
    
     CODES / STANDARDS
    
     NMD90 cables meet or exceed the
    
     following requirements:
    
     CONSTRUCTION
    
     ASTM
    
     CSA C22.2 No. 48 (non-metallic sheathed cable)
    
     Canadian Electrical Code1
    
     NMD90 cables are available as two- or three-conductor cables with a bare grounding conductor. It is
    
     manufactured using annealed (soft) copper conductors-compressed standing for stranded conductors; a
    
     heat-resistant thermoplastic polyvinyl chloride (PVC) insulation and nylon jacket for the individual conductors
    
     with a PVC jacket for the overall construction.
    
     Conductors are white, black and red (for 3 conductor cables). Cable jackets are colour coded by size for quick
    
     identification in the Table below
    
     JACKET COLOUR CODE – Typical Application Guide
    
     •WHITE – General Residential Wiring
    
     •RED – 2 Black and Red conductors – 208V-240V Circuits (no neutral)
    
     •ORANGE – No. 10 AWG General Residential Wiring
    
     •YELLOW – No. 12 AWG General Residential Wiring
    
     •BLUE – No. 14 AWG – 2 black and white conductors – 120V Arc Fault Circuit Interupter Applications
    
     __________________________________________________________________________________________
    
     CABLE PRINTING
    
     12 AWG 2 CDRS BLACK/WHITE NMD90 NYLON 300 VOLTS FT1
    
     NMD90 jackets which reduces the coefficient of friction, allowing cables to be installed without external
    
     lubricants, resulting in reduced labour and materials costs.
    
     PVC / NYLON INSULATION
    
     PVC JACKET
    
     GROUND CONDUCTOR COPPER CONDUCTOR PVC / NYLON INSULATION
    
     PVC JACKET
Company profile
    
 
Workshop
Main products
Certifications