Bare Copper Conductor PE XLPE Insulated Aluminium Mylar Tape Screen Galvanized Steel Wire Armoured Instrument Cable

Bare Copper Conductor PE XLPE Insulated aluminium mylar tape Screen Galvanized steel wire Armoured Instrument Cable

Application                                                                                                                                                       

For transmission of analogue and digital signals in instrument and control systems; use in zone 1 and zone 2 group

ΙΙ classified areas (IEC 60079 part 14). Not allowed for direct connection to low impedance source, e.g. the public

mains electricity supply.

Recommended for direct burial. For indoor and outdoor installation in dry and wet locations on racks, in conduits.

1. Conductor: Plain annealed copper, sizes: 0.5 mm² solid, 1.0 mm² solid, 0.5 mm² flexible, 0.75 mm² flexible or 1.5mm²          

                         stranded

2. Insulation: Polyethylene PE

Colour code: black / blue;

with numbered tape under separator tape of the pair screen

3. Pair screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²

4. Collective screen: 24 µm aluminium / PETP tape over tinned copper drain wire, 0.5 mm²

5. Bedding: polyethylene PE, black

6. Armour: galvanized round steel wires

7. Outer sheath: Polyvinyl chloride PVC, black

                              *Flame retardant

                              *Oil resistant,

                              *Anti-rodent&termite

These properties could be offered upon requested.

Technical Data                                                                                                                                    

 Temperature range:

-40°C up to +70°C (during operation)

– 5°C up to +50°C (during installation)

Min. bending radius:

8 x cable-Ø