10 mm 35 mm 50mm 95mm ABC Aluminium Conductor Aerial Bundled Electrical Wires Cables 3 Phase Overhead Power Cable

Application
Line name:
Overhead Transmission Line
Application:
Overhead lines are used for overhead fixed laying lines and service entrance conductor.
Features:
The overhead insulated cable has the advantages of simple structure, safety and reliability, excellent mechanical and physical properties and electrical properties, environmental resistance and ultraviolet resistance, etc., due to its insulation material is weather-resistant special overhead insulated cable material, the long-term allowable working temperature of the cable is as high as 70ºC or 90ºC, and the electrical insulation performance is excellent, and the volume resistivity is more than 1.0×10^12Ω·m; In laying, the overhead insulated cable can reduce the laying gap, save the line corridor and reduce the voltage drop. It can reduce the occurrence of power supply accidents and ensure personal safety in use.
Required Standard
Standard:
GB/T 12527-2008, Overhead insulated cable with rated voltage of 1kV and below.
Additional standard
Service characteristics
Rated Voltage: 1KV
Operation Temperature:
The maximum allowable long-term operating temperature of the conductor is 70ºC
Environment Temperature:
Laying Temperature:
The laying temperature of the cable should not be lower than -20ºC.
Bending Radius:
When the cable of outer diameter (D)is less than 25mm, and the bending radius is not less than 4D. When the cables of outer diameter (D)is greater than or equal to 25mm, the bending radius is not less than 6D.

Product Marking
GUOWANG CABLE GROUP
Delivery and Tolerance
Delivery Length:
The weight ofcables less than 80kg are allowed to be delivered in rings, and the delivery length of short sections of the cable shall not exceed 5% of the total length of the delivery, or any length of cable may be delivered according to the agreement between the parties.
Error In Length:
The measurement error of delivery length is ±0.5%.
Packaging, Transport and Storage:

1. Cables in rolls and coils should be neatly wound and properly packed; The cable tray shall comply with the provisions of JB/T8137-1999; The cable ends should be securely sealed, and the cable ends extending out of the disk should be covered with a protective cover, the length of the cable ends extending out of the disk should be less than 300mm.
2. It should be labeled with a content on the package of the cable: manufacturer name, model, specification, rated voltage, length, quality, manufacturing date, standard number or certification mark, the correct rotation direction of the cable tray, etc.
3. Transport is generally in the form of vehicles and ships, and the cable must be firmly fixed during transport to avoid bumping or tipping over to cause damage to the cable or disc.
4. Do not lay the cable tray flat; It is strictly forbidden to drop the cable tray containing the cable from a height during transportation.
5. The finished cable should be stored in an environment where the temperature is between 0 and 40ºCand the humidity is below 85%, so that it is not directly exposed to sunlight or rain, and should be properly ventilated to keep the environment dry.

Ordering Instruction
The model, specification, length, delivery date, packing method and other necessary information of the cable should be correctly marked when ordering.
Installation Notice
Cable should keep some distance from trees when it is being laid.