6/10kv (11KV) XLPE Power Cable N2xy/Na2xy Cable 35mm2/50mm2

6/10KV(11KV) XLPE Power Cable N2XY/NA2XY Cable  1x35mm2 / 1x50mm2

 

1. Applications

For installation in ground, in water, outdoors, indoors and in cable ducts for power stations, industry, and
distribution networks. The good installation properties of this cable make installation easy, even on difficult routes. Acc.to VDE 0276-603 cables must be protected against direct sun irradiation

2. Reference Standards

VDE 0276 , IEC 60502-2

3. Rated Voltage

6/10KV(12KV), 12/20KV(24KV), 18/30KV(36KV)

4. Cable Construction

Conducor: Stranded  annealed  compcted copper or aluminium wire,  in Class 2  , one core or three cores
                    Size: 25mm2,35mm2,70mm2,95mm2,120mm2,150mm2,185mm2,240mm2,300mm2,                                                      400mm2,500mm2,630mm2,800mm2

Conductor Shield: Semi-conducting compound

Insulation: Cross-linked polyethylene (XLPE) or Tree retardant cross-linked polyethylene (TR-XLPE) 

Insulation Shield: Semi-conducting compound

Concentric Neutral wire & Copper tape :  Copper wires, helically applied and uniformly spaced. Bare copper                                tape , helically applied

Wrapping tape: non-woven clothing tape or water swelling tape

Outer sheath:  Polyvinyl chloride (PVC) or polyethylene (PE). Configuration Options: On request, Triplex or Paralleled configurations.

5. MAXIMUM CONDUCTOR TEMPERATURE

Normal continuous at 90ºC, Overload at 130ºC and Short circuit at 250ºC