5% off 6.35/11kv 12.7/22kv 19/33kv Outdoor Energy IEC 60502 BS 6622 HD 603 VDE 0276 AS/NZS 1429 Sans 6/10kv 12/20kv 18/30kv Underground Cable

New Product MV Underground Power Cable Outdoor Energy IEC 60502 BS6622- 6/10 6.35/11kV
6/10kV 12/20kV 18/30kV MV Underground Power Cable Outdoor Energy IEC 60502 BS 6622 VDE 0276 HD 603 6.35/11kV 12.7/22kV 19/33kV SWA Armored Cable

 

Application

There aluminium wire armour (AWA) for single core cables and steel wire armour (SWA) for multicore cables provide robust mechanical protection making these MV cables suitable for direct burial in the ground. These armored MV mains power cables are more commonly supplied with copper conductors but they are also available with aluminium conductors upon request to the same standard. The copper conductors are stranded (Class 2) whereas the aluminium conductors are compliant to the standard using both stranded and solid (Class 1) constructions.

Operating characteristics

1. Laying temperature: ≥0°C;

2. Cable conductor long-term allowable working temperature: PVC insulated ≤70°C, XLPE insulated ≤90°C;

3. Maximum operating temperature in case of short-circuit: PVC insulated ≤160°C, XLPE insulation ≤ 250°C;

4. Cable bending radius:

Note: D is the cable diameter

MV Cables Construction

Cable models, names, and laying conditions 

SWA Armored 3-core cable with XLPE insualtion. Rated voltage 3.6/6(7.2)kV  3.8/6.6(7.2) KV Cable Data
CU/XLPE/PVC/SWA/PVC 

Armored 3-core cable with XLPE insualtion. Rated voltage 6/10 KV 6.35/11KV Cable Data

SWA Armored 3-core cable with XLPE insualtion. Rated voltage 12/20(24) KV 12.7/22(24)kV

Cable Data

SWA Armored 3-core cable with XLPE insualtion. Rated voltage 18/30(36)kV  19/33(36)kV Cable Date

Note: The single-core armored cables are used for the D.C. system only. If used for the A.C. system, the magnetic isolation should be applied to the steel armor wires of non-magnetical materials that should be used.

3 Operating characteristics

– Rated power-frepuency voltage U0/U: 6.35/11kV.

– Max.admissible operating temperature of the conductor:90ºC.

– Max. short-circurt temperature of conductor shall not exceed 250ºC. (5s maximum duration)

– The ambient temperature under installation should not below 0ºC.

– The bending radius of a single-core cable should not less than 20 times of the cable diameter. 

The bending radius of a multi-core cable should not less than 15 times of the cable diameter.