300/500V PVC/PE/XLPE Insulated Screened Instrument Cable

System

This product is suitable for signal transmission of electronic computer systems, monitoring loops, and automated control systems in lines with AC 50Hz and rated voltage 0.3/0.5kV, as well as connecting wires for testing instruments and meters.

Occasion

It can be widely used in computer systems or automation devices for detection and control in power generation, metallurgy, petroleum, chemical industry, textile and other departments, as well as general industrial computers.

 Product characteristics

Cables for computers and instruments have low dielectric loss, strong signal transmission capabilities, and can reliably transmit weak analog signals.

The cable is shielded with copper wire and has good anti-interference performance

Raw materials come from a wide range of sources

Executive standard

TICW/06-2009 Computer and Instrument Cables

Rated voltage

The power frequency AC rated voltage is 0.3/0.5kV, and the maximum voltage of the AC system should not exceed 0.6kV.

Operating temperature

Cable conductor allows the highest working temperature 70 ºC for a long time. ;During a short circuit, the maximum temperature of the cable conductor shall not exceed 160°C and the duration shall not exceed 5s.

Ambient temperature

The ambient temperature of the cable should not be lower than -10 ° C.

Laying temperature

The laying temperature of the cable should not be lower than 0ºC.